CAREERS

Position Summary Equipment Engineer is responsible for the installation, troubleshooting and maintenance of production equipment. Key Responsibilities Initiate meeting within the team or with cross functional counterparts to resolve complex integration issues and chronic hardware issues. Manage and plan new equipment start-up to support production, from facilities hook-up, vendor startup, to acceptance of equipment for production. Establish Preventive Maintenance (PM) plans for all equipment taking into account safety and optimize PM for quality, cost, and productivity. Including spare review, planning, budgeting and tracking. Establish and document work process and conduct self-audit to ensure specifications meet company Quality Standard requirements. Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness. Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system. Any other ad-hoc duties as assigned. Requirement Bachelor's Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering Fresh graduates who have just completed the Bachelor's Degree. To apply for this job, email your CV to hr@silicon-box.com .

Position Summary Process Engineer (Front and Back End) is responsible for development and establishment of production process . Key Responsibilities Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line. Establish, review and update specifications, workflow, quality and safety related documentation for production line. Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage. Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams. Coordinate and liaise with vendor/suppliers on process issue or quality issue. Support customer NPI activities and internal engineering activities. New material, process & machine development and qualification. Handle and manage customer audits and 8D reports. Provide disposition for engineering and production lots. Conduct process characterization and qualification to establish process baseline. Requirement Bachelor’s Degree in Chemicals, Materials Science, Microelectronics, Mechanical Engineering or relevant Engineering Degrees. Fresh graduates who have just completed the Bachelor's Degree. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Production Planner is responsible for planning of production including release/schedule of the work order. This position will have frequent interactions with internal stakeholders such as Customer Service, Manufacturing Team and Engineering team.  Key Responsibilities: Manage Production Daily/Weekly demand loading execution and delivery fulfilment per customers’ requirement. Work with Customer Service to understand customer forecast and requirement to utilize secured capacity. Work with Customer Service on Die/Wafers Visibility from customer to ensure its continuously support to production loading. Work with Customer Service to ensure minimum line changes to maximise utilization and output. Monitor daily wafer inventory, input & output performance and highlight potential delinquency to team for immediate resolution. Monitor aging lots, remnant die, aging wafer and work with CS/internal team for disposition. Support ad-hoc, urgent demand request and provide regular tracking status. Drive OTD performance and Cycle time performance. Prepare and update monthly customer Cycle time report. Prepare management report in accordance with KPI (if any). Simplify report generation and be involved in process improvement. Provide assistance to customers when required. Any other ad-hoc duties as assigned. Requirements: Minimum 3 years’ experience in Production Planning for Assembly/Fab in Semiconductor Industry. Experience working in OSAT environment and experience in multi die planning is a plus. Good communication and interpersonal skills. Able to work with internal and other functional teams in a dynamic and fast pace environment. Proactive, self starter and good team player. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Production Planner is responsible for planning of production including release/schedule of the work order. This position will have frequent interactions with internal stakeholders such as Customer Service, Manufacturing Team and Engineering team.  Key Responsibilities: Manage Production Daily/Weekly demand loading execution and delivery fulfilment per customers’ requirement. Work with Customer Service to understand customer forecast and requirement to utilize secured capacity. Work with Customer Service on Die/Wafers Visibility from customer to ensure its continuously support to production loading. Work with Customer Service to ensure minimum line changes to maximise utilization and output. Monitor daily wafer inventory, input & output performance and highlight potential delinquency to team for immediate resolution. Monitor aging lots, remnant die, aging wafer and work with CS/internal team for disposition. Support ad-hoc, urgent demand request and provide regular tracking status. Drive OTD performance and Cycle time performance. Prepare and update monthly customer Cycle time report. Prepare management report in accordance with KPI (if any). Simplify report generation and be involved in process improvement. Provide assistance to customers when required. Any other ad-hoc duties as assigned. Requirements: Minimum 3 years’ experience in Production Planning for Assembly/Fab in Semiconductor Industry. Experience working in OSAT environment and experience in multi die planning is a plus. Good communication and interpersonal skills. Able to work with internal and other functional teams in a dynamic and fast pace environment. Proactive, self starter and good team player. To apply for this job, email your CV to hr@silicon-box.com

Position Summary As senior system engineer, your role is to work within an infra team to ensure the stability, integrity and efficient operation of the in-house information systems that support core organizational functions. You are also required Implement Windows & Linux based infrastructure based on business requirements, Ongoing maintenance, security, and availability of Windows based infrastructure based on business requirements. Key Responsibilities Able to independently troubleshoot and debug complex Wintel issues involving Windows (Win2008r2/2012/2016/2022) platform, VMware hypervisor, SAN Switches and DELL Storages. Engage in the maintenance and support activities, which include troubleshooting, incident response, and patching in a timely manner. Provide level2 and level 3 support for Windows-related issues. Evaluating Systems architecture and propose recommendations are required. Develop and maintain IT SOPs, documentation, and asset inventory. Implement Windows based infrastructure based on business requirements. Ongoing maintenance, security, and availability of Windows based infrastructure based on business requirements. Troubleshoot and resolve Windows OS related incidents and problems according to customer processes. Perform Root Cause Analysis (RCA) for OS related service problems as part of problem management. Liaise with support vendors for maintenance, support or issues resolution. Support Windows Server based systems, system software, clustering software and system management agents. Assist in analyzing historical usage for tracking and trending by CPU, memory, I/O and storage. Implement capacity improvement plan. Assist in developing and maintaining the Technical Disaster Recovery Plan. Provide technical support during disasters. Execute Technical Disaster Recovery plan during DR and DR drill. Setting up and managing Windows Active Directory, inclusive of managing GPOs and user profiles. Windows Clustering. VMWare hosts (inclusive of VCenters). Virtual machines, including all OS platforms (Linux and windows) Acronis / Commvault backup, including defining backup policies based on industry standards. Maintain and monitor Kaspersky Antivirus, including defining policies based on industry standards. Review event logs on a regular basis based on business requirements. Manage the server OS patching procedure and security hardening. Evaluate and review patches, before and after installation. Perform backup and restore of systems based on business requirement. Manage and monitor systems using monitoring software. Writing/updating technical design, build and process documentations. Requirements Diploma/Bachelor’s Degree in Business Administration, Computer Science, or equivalent At least 5+ years of experience in IT Infrastructure environment. Certification such as MCSE, MCSA, or equivalent are a plus. Strong experience and knowledge in virtualization technologies (VMWare and Hyper-V). Strong knowledge and experience in managing Windows/Wintel servers and virtualization through VMware. Strong experience in managing and supporting Active Directory, ADFS, Group Policy, IIS, File & Print server, Cluster, DNS, DHCP, WSUS, O365, MS Team is a must. Strong experience in OS hardening, patching Strong analytical and problem solving/troubleshooting skills, combined with ability to provide quick resolution to problems. Proven ability to meet day-to-day operation, project planning and activity planning and implementation. Provide guidance on both technical and problem analysis aspects. Troubleshoot and remediate issues impacting the operation of the system infrastructure. Document the design, operation and troubleshooting of technology platforms and procedures. Strong initiate, good team player, enjoys taking ownership of issues, process driven and great attention to details. Excellent analytical and problem-solving skills. Strong written, oral, and interpersonal communication. Must be independent, resourceful, pro-active and a team player. Ability to effectively prioritize and execute tasks in a high-pressure environment. Knowledge in monitoring tools like SolarWinds, Zabbix, PRTG will be preferred. Knowledge in storage Management HP, DELL, IBM, NetApp Storage is an added advantage. Excellent analytical and problem-solving skills. Proficiency in PowerShell scripting and programming languages. Work experience in manufacturing systems is an added advantage. To apply for this job, email your CV to hr@silicon-box.com

Position Summary As an IT Helpdesk Manager, you are responsible for leading a desktop support team, ensuring timely and effective resolution of IT support requests and incidents. IT helpdesk manager also responsible for overseeing, delegates, and participates in the diverse job tasks of the desktop support including but not limited to, hardware and software, printers, projects, and related IT equipment. Key Responsibilities Lead and manage a team of desktop support engineers, providing guidance, support and mentorship. Plan, coordinate, and prioritize team activities to ensure timely and effective resolution of IT support requests and incidents. Setting performance goals and conducting regular performance evaluations. Develop and maintain IT SOPs, documentation, and asset inventory. Facilitating communication between the helpdesk team and other departments within the organisation. Providing regular updates to management on helpdesk performance and key metrics. Staying informed about industrial best practices and emerging technologies will enhance the helpdesk’s capabilities. Monitor and report on SLA related to desktop support service levels, team productivity, and customer satisfaction. Assist in quotation and purchase requisition for IT purchase request. Log all incidents (either via phone or email) into the Incident Management System and handle all incidents within the SLA. Troubleshoot and resolve end user application issues, maintain, and update technical support documentation. Engaged in internal EUC projects, PC/Laptop purchase, part replacement / repair for end user computing devices. Assist in the testing and rollout of the software / patches to all PCs. Proactively monitor, identity, investigate and resolve technical issues. Understand the user’s requirement, provide recommendation and solution to the user within SLA. Set performance goals and KPIs for the team and ensure they are met. Collaborate with other IT teams and stakeholders to ensure seamless integration and alignment of desktop support services with overall IT strategies and initiatives. Conduct regular team meetings to communicate updates, provide training and knowledge sharing, and foster a positive team culture. Participate in hiring and onboarding activities, including conducting interviews, and training new team members. Stay up to date with industry trends, emerging technologies, and best practices in desktop support and service management. Developing and implementing efficient helpdesk processes and workflows. Requirements Bachelor’s degree in engineering, Computer Science, IT or similar. Strong oral and written communication skills with demonstrated abilities to communicate with other department team members. Minimum more than 10 years of experience in End User support environment. Minimum 5 years of management experience that demonstrates proficiency in leadership techniques and management of resources. Hands-on experience with a wide variety of computer software, hardware and peripherals including AV/VC systems. Work experience in 24x7 manufacturing environment is an added advantage. Good interpersonal skills for customer relations. Ability to work under pressure. Strong analytical and problem solving/troubleshooting skills, combined with ability to provide quick resolution to problems. Knowledgeable in-service desk systems and IT tools. In-depth knowledge of servers and network, data organization, and both hardware and software. Must be team-oriented, possess a positive attitude and work well with others. Have a genuine passion for providing excellent customer service and a problem -solving attitude. To apply for this job, email your CV to hr@silicon-box.com

Position Summary As an IT helpdesk engineer, you will be providing 1st Level IT support to end-users locally and regionally via, via Phone and Remote-control tools. Job scopes includes handling new PC/laptops/printers, AV/VC system, IT purchase/repair, logging and closing tickets, troubleshooting and solving EUC issues, maintaining inventory, providing daily/weekly performance report to team lead, completing assigned project tasks, and to support after office-hour standby call rotation. Key Responsibilities Managed all helpdesk service requests (Office & Production users). Plan, coordinate, and prioritize activities tasks to ensure timely and effective resolution of IT support requests and incidents. Develop and maintain IT SOPs, documentation, and asset inventory. Monitor and report on SLA related to desktop support service levels, team productivity, and customer satisfaction. Log all incidents (either via phone or email) into the Incident Management System and handle all incidents within the SLA. Troubleshoot and resolve end user application issues, maintain, and update technical support documentation. Engaged in internal EUC projects, PC/Laptop purchase, part replacement / repair for end user computing devices. Assist in the testing and rollout of the hardware, software and internal applications, patches to all PCs. Proactively monitor, identity, investigate and resolve technical issues. Provide daily/weekly/monthly update on the progress to the helpdesk lead. Understand the user’s requirement, provide recommendation and solution to the user within SLA. Requirements Higher Nitech or Diploma in Information Technology, Computer Science or relevant fields. Strong oral and written communication skills with demonstrated abilities to communicate with other department team members. At least 5 years of experience in End User support environment. Work experience in Windows 7,8,10 and above. Work experience in 24x7 manufacturing environment is an added advantage. Good interpersonal skills for customer relations. Ability to work under pressure. Strong analytical and problem solving/troubleshooting skills, combined with ability to provide quick resolution to problems. Knowledgeable in-service desk systems and IT tools. Must be independent, resourceful, pro-active and a team player. In-depth knowledge of servers and network, data organization, and both hardware and software. Effectively communicate with teammates and managers. Ability to prioritize effectively and work with a sense of urgency. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Electrical Simulation Engineer / Senior Engineer is responsible for product package electrical simulation. Candidates with semiconductor packaging experience are encouraged to apply for this position. Key Responsibilities Work with the internal & external customer to: Conduct power integrity, signal integrity, EMC, EMI, EDS simulation for electrical analysis in component level as well as system level. Provide comment and recommendation to product design and process optimization. Provide consultancy to technical discussion and enquiry. Provide electrical input to mechanical simulation for thermal and stress analysis. Generate IPs for the company. Prepare the simulation reports with data analysis and recommendation. Support audits if any. Other ad-hoc activities assigned by the reporting manager. Requirement MS degree in electrical +5 years’ experience OR PhD in Mechanical Engineering +3 years’ experience Good understanding of JEDEC thermal and reliability spec. Familiar with material properties which are critical to simulation. Knowledge of Cadence, general electrical design. Solid fundamentals and expertise in electrical analysis. Hands-on skills on simulation tools such as: Cadence, ANSYS RedHAWK, ANSYS PowerArtlist, or other equivalent. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Technical Program Manager is responsible for overall management of customers’ technical projects and related matters. Candidates with wafer bumping, WLCSP, or fanout packaging experience are encouraged to apply for this position. Key Responsibilities Works with sales managers and customer service in all technical aspects of the customers’ engagements Provides technical support to sales team to gain market share and improve customer’s profitability status. Communicates new customer technology requirements to the internal teams. Communicates and manage all customer process and package roadmap strategies. Coordinates factory/customer technical projects and act as the point of contact for new quality/reliability programs. Implements change notices, resolves technical issues. Prepares and participate in audits and factory visits with customers. Other ad-hoc activities assigned by the management. Requirements Min bachelor’s degree in engineering. Min 5 - 7 years of relevant working experience in the assembly process of the back end of semiconductor production. Possess good knowledge and hands-on experience in assembly processes especially in wafer-level packaging like wafer bumping, eWLB or other wafer-level Fanout Packaging. Knowledge on DOE, reliability requirements, material selection, FMEA, Failure Analysis and other quality and statistical tools. Self-driven and has excellent problem resolution and organizational skills for daily customer support and managing on-going and future programs. Has initiative and demonstrate excellent follow-up on active programs with multiple customers. Able to communicate and present effectively in small and large groups. Able to work independently and as a team player with customers and cross-functional teams within the organization. Familiarity with SAP or other ERP systems is an added advantage. Able and willing to travel as needed. To apply for this job, email your CV to hr@silicon-box.com

What The Role Is We are seeking a highly skilled and detail-oriented Financial Analyst to join our dynamic team. This role is crucial for maintaining and developing our financial models, correlate applicable business and financial information, ensuring alignment with our business strategies and objectives. You will be the custodian of all financial models, scenarios, planning, forecasting, and budgeting, providing vital information to our C-level executives and investors, aid managerial planning and support decision making on the allocation and investment of the budget. Job Responsibilitie s: Develop and manage comprehensive financial models and scenarios for strategic planning & forecasting, providing financial forecast/budget/business plan. Develop a strong understanding of external and internal issues that can affect the financial models, and effectively optimise limited resources to support decision-making. Identify gaps and solution to improve the management of financial resources and try to reduce businesses’ operational and production costs. Analyse financial data to identify trends, perform risk assessments, optimise financial/strategic planning and recommend solutions. Maintain strict alignment of the funding plan with the overall business plan and forecasts. Assist in the preparation of quarterly and annual financial reports. Prepare regular financial updates for government agencies, shareholders, and applicable stakeholders. Prepare management reports for internal and external requirements, as well as protect sensitive and confidential information. Explore and support different investment opportunities and financing needs. Ensure seamless integration of financial planning with technology, engineering, operations, production, costing, and financing teams. Highly effective collaboration with various departments to ensure financial strategies support company-wide goals. Develop initiatives and policies that may improve financial growth. Support audit compliance/requirements. Support finance related projects. Requirements: Bachelor’s degree in Finance, Accounting, Economics, or related field with relevant knowledge and experience. Master’s degree, CFA or CPA is a plus. Minimum of 3-5 years’ experience in financial analysis. Related industries and corporate structure experience are pluses. Advanced knowledge of Microsoft Excel, Word, PowerPoint and financial software applications, familiar with analysis methods, data management and reporting software. Strong proficiency in financial modelling, scenario analysis, and budgeting. Hands on and highly meticulous yet keeping big picture in check. Excellent analytical, problem-solving, presentation, reporting, organisational and project management skills. Excellent in communicate complex financial information in a clear and concise manner. Proven experience in managing both internal and external stakeholders at all levels. Proven ability to work effectively with excellent collaboration in a team environment and across multiple departments. Passionate, energize and compose with agile and versatile working conditions with proven high-quality deliverables. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Account Management Specialist is responsible for customer order planning including management, logistics arrangement and other ad-hoc services to customers. This is not a sales position, but a key functionary in post-sales account management needed to drive success in execution. Candidates must have proven success in executing on manufacturing requirements, supply chain management and support for enterprise level clients, preferably in semiconductors manufacturing and/or packaging. Key Responsibilities: Support Quarterly Business Review meetings for existing clients Lead sales order creation for billing and shipment, post-sale Work with IT to develop reports for customers and maintain the quality of these reports Brief internally the changes in customer requirements according to customers' specs Update clients on changing product specifications and processes related to their business Work with internal teams and customer and be responsible for customer order planning and execution by Provide visibility for incoming wafers. Provide instruction to execute orders and coordinate the priorities of orders Provide WIP status, ship-out plan and finished good information to customers Arrangement of customer wafers to fulfill Forecast / AOP/Customer Shipment requirements Attend to customer enquiries and complaints Upselling Other ad-hoc activities assigned by the management. Requirements: Degree in Business, Finance, Engineering, Project/Supply Chain Management Min 5 years’ experience leading customer service for enterprise level clients Internships do not count as experience, must have been responsible for revenue goals Proven track record of success in client engagement, upsell, and execution outcomes Must have basic understanding of manufacturing expectations, willingness to understand technical details and client requirements, and ensure outcomes Experience on team leading and management a plus Liaise and coordinate with customer as well as internal engineering, production, logistics, sales & planning teams Must take ownership and possess strong problem solving, communication and interpersonal skills Ability to work under pressure in a very dynamic environment To apply for this job, email your CV to hr@silicon-box.com

Position Summary Customer Service Specialist is accountable for excellent customer service experience. The CSS will have frequent interactions with internal stakeholders such as Customer Success team and the Operational team (factory) within the organization. He or she will have to interact directly with clients with the guidance and procedure provided by SB. Key Responsibilities: Build strong relationships with customers. Monthly commitment of 6- or 12months rolling forecast back to customer Work with internal teams and customer on the customer order planning and execution by I. Provide visibility for incoming wafers. II. Provide instruction to execute orders and coordinate the priorities of orders. III. Provide WIP status, ship-out plan and finished good information to customers. IV. Arrangement of customer wafers to fulfill Forecast / AOP/Customer Shipment requirement. Maintain pricing and sales order creation for billing and shipment. Brief internal team on changes in flow / process / customer requirements after understanding customers' specs. Co-ordinate any customer returned materials and work with the relevant department on material disposition. Attend to customer enquiries and complaints. Work with IT to develop reports as per customer’s requirement and maintain the quality of these reports. Host Customer Visits and Quarterly Business Review meetings Perform any other tasks relevant to support Customer’s requirements. Perform any other duties assigned by Supervisor or Manager from time to time. Requirements: Degree in Engineering, Business Administration or Marketing Management or Experience in OSAT/Semi con is a plus Able to bridge between and coordinate with customer and internal engineering, logistics, sales & planning team. Possess strong analyzing, problem solving, communication and interpersonal skills. Ability to work under pressure in a very dynamic environment. To apply for this job, email your CV to hr@silicon-box.com

Position Summary Industrial Engineering Manager is responsible for plant capacity management and production floor layout management. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position. Key Responsibilities: Build and lead a team to support the department various objectives in the following areas: Analysis of manufacturing capacity and proper resource arrangement. Establish and maintain capacity model. Plant shop floor layout optimization, including machine layouts in production line. Production capacity planning. IE-related documentation. Team management and motivation. Cost modelling. Direct material usage control to drive cost reduction/tracking. Machine UPH increment. Operation efficiency improvement by MODPATS (Modular Arrangement of Predetermined Time Standards) analysis. Other ad-hoc activities assigned by the management. Requirements: Minimum Bachelor's Degree in Industrial Engineering or equivalent. At least 8 years’ experience in semiconductor manufacturing environment or related field. Experience in team leadership and management. Knowledge of semiconductor manufacturing process is an advantage. Hand-on skills on CAD tools like AutoCAD. To apply for this job, email your CV to hr@silicon-box.com

Position Summary The Senior MES Engineer is responsible for development and maintenance of manufacturing execution system (MES). Candidates with work experience in a manufacturing computer team or MES developer experience are encouraged to apply for this position. Key Responsibilities Development, operation, and maintenance of MES system including Equipment Data Collection, Barcode Label, Schedule system and QA system / SPC. Identify failures, root cause analysis, and recommend solution for technical issues. Interfacing and communications between MES and ERP. Collaborate with Operations and building stakeholders throughout the software or system development lifecycle: gather system/end user requirements; complete design, implementation, and testing/validation of changes; document changes; maintain and monitor the system; ensure end user readiness. Requirement Bachelor’s Degree in Engineering, Computer Science, IT or similar discipline. More than 3 years of MES design, implementation, maintenance including 2 years of development experience. Strong oral and written communication skills with demonstrated abilities to communicate with other department team members. Team player with strong analytical and problem-solving skills. Experience in Programming languages (C#, .Net, etc.) and DBMS (Oracle, MS-SQL, etc.). Experience in Manufacturing process knowledge (Assembly, Testing, Shipping, Etc.) and Smart factory/MES implementation . Preferred Qualifications Global MES package implementation and operation. Production and quality control process improvement consulting. Building solution-based production/quality management system . Working knowledge of SAP. To apply for this job, email your CV to hr@silicon-box.com

Senior Packaging Designer (BGA & Substrate & WLCSP) is responsible for product and tooling design. Candidates with wafer bumping, WLCSP, BGA or fanout packaging experience are encouraged to apply for this position. Key responsibilities include working with the internal & external customer to: Generate, update, and revise electrical routing layout based on the netlist or design provided by external customers. Generate test vehicle design and the related PCB design. Prepare design risk assessment report. Generate reticle and stencil design. Generate other schematics or drawing as requested.

QMS Engineer shall assist QMS Manager on execution & deployment of Quality Management System and document control for new start-up company.

Quality Assurance Engineer (PQC) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Automation Engineer is responsible for providing technical support in the field of Automation. Implement actions for stable automation systems including activities related to maintenance, yield improvement, machine troubleshooting. Provide assistance in spare parts management, updating/revising of work-related SOP. Survey new solutions or replacement for existing Automation system.

Engineer/Senior Engineer (Failure Analysis and Reliability) is responsible for supporting and managing activities of Reliability and Failure Analysis lab.

Senior Equipment Engineer is responsible for the installation, troubleshooting and maintenance of production equipment. Candidates with Semiconductor, LCD industrial automation industries or smart factory experience are encouraged to apply for this position. Key Responsibilities: Initiate meeting within the team or with cross functional counterparts to resolve complex integration issues and chronic hardware issues. Manage and plan new equipment start-up to support production, from facilities hook-up, vendor startup, to acceptance of equipment for production. Establish Preventive Maintenance (PM) plans for all equipment Establish and document work process and conduct self-audit to ensure specifications meet company Quality Standard requirements Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness. Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.

Process Engineer (Front and Back End) is responsible for development and establishment of production process. Key Responsibilities: Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line. Establish, review and update specifications, workflow, quality and safety related documentation for production line. Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage. Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams. Coordinate and liaise with vendor/suppliers on process issue or quality issue. Support customer NPI activities and internal engineering activities. Oversee and lead the team in the assigned process area. Provide training and guidance to junior engineers. Main contact for the process-related matters in the assigned process area.

Process Integration Engineer (Senior/Principal) is responsible for improvement of process flow and productivity. Candidates with wafer bumping, WLCSP, or fanout packaging experience are encouraged to apply for this position. Key Responsibilities Work with internal team to improve yield/productivity and resolve quality issues. Manage internal engineering studies and generate reports with data analysis. Process flow optimization and customization for individual products. Work with Design team on the optimization of product designs. Work with NPI/R&D team on new product/technology transferring. Update and maintain documents. Other ad-hoc activities assigned by the management.

Production Controller is responsible for coordinating and planning the manufacturing line to meet and ship out finished products to customers and in addition to create and generate clear performance reports to the management.